Add：Shenzhai village, baiyang street, wuyi, jinhua, zhejiang Tel：0086-579-87707277 0086-579-87706177 Mail：wxy@shcups.com
All right : Zhejiang Wuyi Shanhe Industry &Trade CO., LTD. | Zhejiang MAIBO industrial company ltd 浙ICP备05028834号 Powed by 300.cn
MAIBO
NEW CENTER
How do you clean the thermos cup for the first time?
[Abstract]:
1. After you buy the thermos cup, read the manual first, which is usually described above, but many people don't read it, so many people can't use it properly, and the insulation effect is not good. Open the lid of the thermos cup with a plastic bottle stopper, which is the key to sealing and keeping heat. First add some cold water to rinse, then press the button to let the water flow out of the cork. This will clear some of the dust in it.
2. There may be polishing powder in some thermos cups, so after the first cleaning, you should add a moderate amount of neutral detergent with warm water, rinse it after washing, and then rinse it with clean water.
3. As you can see, there are rubber rings in the lid of the bottle, which can be taken down. If there is a taste, it can be soaked in warm water for a period of time. (remember: don't cook in a pot); Inside, there is a water - sealed silicone ring, which is suggested to be removed and cleaned well, usually with thick dust on it.
4. Don't use hard objects to wipe off the surface of the screen or transfer it. Do not soak the cleaning. Put in the small amount of boiled water first and then pour it into the hot water to keep it warm. Put in ice water, you can still keep the cool effect in 12 hours. Plastic parts and silicone rings cannot be heated with boiling water.
5. These are just some of the necessary operations before use. The thermos can be kept warm or cold. If it's cold, you can add some ice, which will make it better.
What should I pay attention to in the vacuum cup cleaning?
1. The cleaning of the stainless steel thermos cup is exquisite and cannot be cleaned with detergent and salt. Because the inner tank of the thermos cup is a sandblasting electrolyte, the inner bladder after electrolysis can avoid the physical reaction between water and stainless steel material. Salt and detergent can damage it.
2. Do not use hard objects to wipe the surface of the screen or transfer. Do not soak the cleaning. Put in the small amount of boiled water first and then pour it into the hot water to keep it warm. Put in ice water, you can still keep the cool effect in 12 hours. Plastic parts and silicone rings cannot be heated with boiling water.
Precautions for use in a thermos cup.
1. Preheat or pre-cool for 1 minute with a small amount of boiling water (or ice water) before use, and the insulation effect will be better.
2. After putting hot water or cold water into the bottle, make sure that the bottle is closed so as not to cause a burn.
3. Fill in excessive hot or cold water, and there will be leakage, please refer to the water location map of the instruction manual.
4. Do not place near the fire source to avoid deformation.
5. Please do not put it in the place where the child can touch, and be careful not to let the children play, there will be the danger of scald.
6. When you put a hot drink in the cup, please be careful to burn.
7. Do not put in the following beverages: dry ice, carbonated drinks, salty liquid, milk, milk beverage, etc.
8. Do not put the goods in the dishwasher, dryer and microwave oven.
9. Avoid the drop of the thermos cup and the huge impact, so as to avoid the failure of the insulation due to the surface depression.